TS-0311-1000	eB3 60PSI 60mm Silver
TS-0311-1002	eB3 60PSI 60mm Black

TS-0311-100X - eBoost 3 V1.0.0 IO 1.0.1

TS-0311-100X - eBoost 3 V1.3.0 IO 1.3.0

<h1 id="isPasted" tabindex="0"><span style=" border-box;background-color: rgb(252, 237, 158);border-right: 5px solid rgb(242, 219, 104);margin: 10px 0px;position: relative;display: inline-block;padding: 10px 10px 10px 40px;"><span style=" border-box;color: rgb(0, 0, 0);">Important Notes on Your New eBoost 3 with External Sensor</span></span></h1><ul><li style="font-size: 16px; text-align: justify;">Turbosmart recommends that your e-Boost3 is fitted by an appropriately qualified technician.</li><li style="font-size: 16px; text-align: justify;">Consult your local tuning specialist before setting your boost pressure, setting boost beyond your engines capability can result in severe engine damage or failure!</li><li style="font-size: 16px; text-align: justify;">Turbosmart recommends that the engines Air/Fuel ratio is checked once the desired boost pressure is set, any increase in boost pressure can cause the engine to run lean resulting in severe engine damage or failure.</li><li style="font-size: 16px; text-align: justify;">Turbosmart recommends that the e-Boost3 is not used in conjunction with any type of &#x201C;Draw Through&#x201D; Fuel System.&#xA0;</li><li style="font-size: 16px; text-align: justify;">Turbosmart recommends that boost pressure is set using a Dynamometer and not on public roads.</li><li style="font-size: 16px; text-align: justify;">The e-Boost3 may not be able to completely compensate for a drop in boost pressure at high RPM due to the turbocharger operating beyond its maximum efficiency range i.e. incorrect turbocharger sizing or excessive exhaust backpressure.</li><li style="font-size: 16px; text-align: justify;">The e-Boost3 cannot compensate for increases in boost pressure at high RPM due to inadequate waste gate flow capacity; the turbo system must maintain a steady base boost curve.</li><li style="font-size: 16px; text-align: justify;">The e-Boost3 cannot be used with external wastegates that are in a poor, worn or non-serviceable condition.</li><li style="font-size: 16px; text-align: justify;">For best results your turbocharger should be correctly sized for your application.</li><li style="font-size: 16px; text-align: justify;">A Turbosmart Fuel Cut Defender may need to be used in conjunction with your e-Boost3, Please check out our website at Turbosmart.com or your nearest Authorised Turbosmart Dealer for more information on Fuel Cut Defenders.</li><li style="font-size: 16px; text-align: justify;">Erratic operation of electronic parts can be caused by Electro Magnetic Interference (EMI). EMI can be generated by aftermarket ignition systems such as CDI which, if wired incorrectly, generate large amounts of EMI through the vehicles electrical system. This can cause items such as ECU&#x2019;s and boost controllers to be affected. Please follow ignition system installation instructions VERY carefully to avoid EMI affecting the e-Boost.</li><li style="font-size: 16px; text-align: justify;">eBoost 2 and eBoost 3 values are not interchangeable. reviewing boost control settings should be taken to ensure operation is similar. eB3 should be setup as a new unit.&#xA0;</li></ul><h2 style="text-align: justify;" id="recommendations">Recommendations</h2><ul><li style="font-size: 16px; text-align: justify;">Turbosmart recommends that the Air Fuel ratio is checked once boost pressure is set&#xA0;</li><li style="font-size: 16px; text-align: justify;">Turbosmart recommends that your boost controller is fitted and adjusted by an appropriately qualified technician</li></ul><p style="text-align: justify;">&#xA0;</p><h2 style="text-align: justify;" id="tools-required">Tools Required</h2><ul><li style="font-size: 16px; text-align: justify;">General Mechanic Tools</li><li style="font-size: 16px; text-align: justify;">General Electrical Tools</li></ul><p style="text-align: justify;">________________________________________</p><h2 id="installation"><span style="font-size: 24px;"><strong>Installation</strong></span></h2><h3 style="text-align: justify;" id="mounting-the-eboost-3">Mounting the eBoost 3</h3><ul><li style="text-align: justify;"><span style="font-size: 16px;">The e-Boost3 is not waterproof and must be mounted inside the cabin. The unit has an operating temperature range of -20degC to +70degC.</span></li><li style="text-align: justify;"><span style="font-size: 16px;">The e-Boost3 is designed to be panel mounted with the bracket supplied. Alternatively the 60mm e-Boost3 can be mounted using the Turbosmart 60mm dash mounting accessory, pod or &#x201C;A pillar&#x201D; mounts. The Turbosmart dash mounting accessory offers full tilt and swivel adjustment.</span></li></ul><p style="text-align: justify;">&#xA0;<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025081803-1ac828d0-e8e4-41a5-aa0e-5cffe5b50240-dd39e22f-7d23-4782-bb47-d810d3c011d9.png" style="width: 434px;" class="fr-fic fr-dib"></p><p style="text-align: justify;">&#x2022; The E-Boost 3 requires a vacuum/pressure signal from the intake manifold to function. A combination of poly tube and silicone hose is used to connect the E-boost 3 to a adequate vacuum/pressure signal. Route the poly tube from the E-boost 3 head unit through the fire wall approximately 100mm (4&#x201D;) only as the poly tube is not rated to the high temperatures of the engine bay.</p><p style="text-align: justify;"><br></p><p style="text-align: justify;">&#xA0;</p><p style="text-align: justify;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025061706-03c9afe3-e264-472e-b65b-1308975900dc-07768549-c459-4658-a6fb-7df3fa81ad4a.png" style="width: 736px;" class="fr-fic fr-dib"></p><p style="text-align: justify;"><br></p><p style="text-align: justify;">&#xA0;</p><ul><li style="font-size: 16px; text-align: justify;">Use the connecting barb to join the poly tube to the 3mm ID silicon hose at the firewall/bulkhead. Ensure the poly tube is pressed all the way onto the connecting barb</li><li style="font-size: 16px; text-align: justify;">Route the silicon hose through the engine bay and connect it to a pressure/vacuum signal from the inlet manifold. Use the supplied tee piece if necessary.</li><li style="font-size: 16px; text-align: justify;">Secure all connections with the supplied hose clamps</li></ul><p style="text-align: justify;"><br></p><h3 style="text-align: justify;" id="wiring-the-eboost-3"><span style="font-size: 16px;">Wiring the eBoost 3</span></h3><ul><li style="font-size: 16px; text-align: justify;">The e-Boost3 must be connected to a typical automotive 12 volt negative earth electrical system.</li><li style="font-size: 16px; text-align: justify;">Soldering or Crimp on electrical connectors must be used on all electrical connections</li><li style="font-size: 16px; text-align: justify;">Unused wires must be insulated with electrical heat shrink or electrical tape so that they do not touch other wires or the chassis</li><li style="font-size: 16px; text-align: justify;">Refer to the following table and diagram for detail on wiring the e-Boost3.</li></ul><p style="text-align: justify;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025112523-cb680bf0-f5f5-45f1-80bb-013e5b5bd021-f6c3ab6b-e1f0-4ca4-aa1c-9ebce2f14c92.png" style="width: 1130px;" class="fr-fic fr-dib"></p><p style="text-align: justify;">&#xA0; &#xA0;<strong>Viewed from back of eBoost.&#xA0;</strong></p><p style="text-align: justify;" id="isPasted"><br></p><p style="text-align: center;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026040900-ef4acb53-71ba-4fb8-b2c4-c04e5a2b596c-90d97b3c-f0ed-49fd-9c49-ccf9e050cd94.png" style="width: 1202px;" class="fr-fic fr-dii"></p><p style="text-align: center;"><br></p><p style="text-align: center;"><br></p><p style="text-align: center;">&#xA0;</p><p style="text-align: center;">&#xA0;</p><p style="text-align: center;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026040900-aebac92f-cf45-4473-ae1b-df5da2e9bc0e-20a84865-8686-41bf-9c2b-baa9549f9885.png" style="width: 1198px;" class="fr-fic fr-dii"></p><p style="text-align: justify;">CAN Bus expansion coming soon.&#xA0;</p><h2 style="text-align: justify;" id="isPasted">EXTERNAL PRESSURE CONNECTION</h2><p style="text-align: justify;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026012901-4966fc83-9188-40eb-b642-65c961ef77fd-34277cbc-29bb-4505-a87e-e39393eb09e1.png" style="width: 958px;" class="fr-fic fr-dib"></p><p style="text-align: justify;">Utilising a 5V, Sensor Ground and Analog Input we can wire in a pressure sensor as part of the external pressure control.&#xA0;</p><p style="text-align: justify;"><br></p><h2 style="text-align: justify;" id="isPasted"><br></h2><h3 style="text-align: justify;" id><br></h3><h2 id="external-pressure-sensor-control">External Pressure Sensor Control</h2><p style="text-align: justify;">To use the external pressure sensor the Boost Source must be changed from internal to analog 1. This will use the Analog 1 Sensor for boost control. Analog 1 setting must be setup to use the voltage and pressure values for the sensor. The internal pressure sensor is rated to 40psi&#xA0;</p><p style="text-align: justify;"><br></p><p style="text-align: justify;"><strong>Example Typical 150psi Sensor</strong></p><p style="text-align: justify;">In this case, the sensor has to be inputted as below.&#xA0;</p><table style="width: 14%; margin-right: calc(86%);"><tbody><tr><td style="width: 31.9424%;">Voltage 1</td><td style="width: 67.7609%;">0.5</td></tr><tr><td style="width: 31.9424%;">Voltage 2</td><td style="width: 67.7609%;">4.5</td></tr><tr><td style="width: 31.9424%;">Pressure 1</td><td style="width: 67.7609%;">0</td></tr><tr><td style="width: 31.9424%;">Pressure 2</td><td style="width: 67.7609%;">150</td></tr></tbody></table><p style="text-align: justify;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026012901-c2d265cf-983d-43dc-af07-9de264a2ffa4-af66b171-9271-48fc-971b-685199b1d236.png" style="width: 833px;" class="fr-fic fr-dib"></p><p style="text-align: justify;"><br></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026031105-896846a3-5e98-4e81-962e-76ba4af8a297-858f830d-e2f0-421a-b921-2bd2b45c38b4.png" style="width: 1178px;" class="fr-fic fr-dib"></p><p><br></p><p><br></p><p id="isPasted"><br></p><p><br></p><h3 style="text-align: justify;" id="-1"><br></h3><h4 id="-2"><br></h4><p style="text-align: justify;"><br></p><p style="text-align: justify;"><br></p><h3 style="text-align: justify;" id="-3"><br></h3><p style="text-align: justify;"><br></p><p style="text-align: justify;"><br></p><p style="text-align: justify;"><br></p><p><br></p>

TS-0311-100X - eBoost 3 External Sensor

<h1 data-renderer-start-pos="1" id="isPasted">eBoost 3 - Firmware Update Procedure</h1><p><strong><span style="color: rgb(184, 49, 47);">Before commencing update, it is important to note down any settings used in the device as they will be overwritten and cannot be recalled.</span></strong></p><p data-renderer-start-pos="1"><a href="https://830533.app.netsuite.com/core/media/media.nl?id=29940541&amp;c=830533&amp;h=8l20ACtp_PWz_HSteZni-aYYKLiD3H0LchQyGDOfIyE7gUtL&amp;_xt=.zip">Download update package by clicking this link</a><span style="font-size: 16px;">. A .zip file should automatically download to your PC after clicking the link.</span></p><p data-renderer-start-pos="1"><span style="font-size: 16px;">Unzip package to a convenient location.</span></p><ol data-indent-level="1" start="1"><li style="font-size: 16px;"><p data-renderer-start-pos="45">Connect your eBoost3 to a PC via USB C Cable.&#xA0;</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="45">Your eBoost3 unit will power on from just having the USB cable connected (note: under USB Power the pressure reading will not be accurate. (This is normal))</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="82">Run the file named &#x201C; esp32_prog.bat&#x201D;by double clicking on it</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="82"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025081806-31031177-5e47-4b25-a0f9-70548701f523-7cb0a33c-cbd5-4c19-b16b-d017b4479e6d.png" style="width: 652px;" class="fr-fic fr-dib"></p></li><li style="font-size: 16px;"><p data-renderer-start-pos="82"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025081805-cb0f0d7f-f004-49ab-991d-b6dfae58c202-55bc3d5e-a1eb-4834-8983-ae2b56920233.png" style="width: 300px;" class="fr-fic fr-dib"></p></li><li style="font-size: 16px;"><p data-renderer-start-pos="82">IF Fatal error occurs, switch to another USB C Cable.</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="82">A command window will appear and should look similar to what is shown below:<strong>&#xA0;This section is important. If it fails within ~3 seconds try another USB C. &#xA0;</strong></p><div data-type="file" data-node-type="media" data-width="1044" data-height="716" data-id="dfecb602-d008-4e83-ac16-a65e48e8acf8" data-collection="contentId-390594588" data-file-name="image-20250502-024926.png" data-file-size="97961" data-file-mime-type="image/png" data-alt="image-20250502-024926.png" data-renderer-start-pos="187" data-ssr-placeholder="nouWf:Eb7Gh:EfLS5:4y5Pz:qz-Pe:F4Zdx-0" data-context-id="390594588"><div data-testid="media-card-view" data-media-vc-wrapper="true"><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025081805-6b69fca1-f5f2-4e93-b7db-603ee186461e-4b1fdd12-1547-4b67-aaf5-1482c2904b19.png" style="width: 612px;" class="fr-fic fr-dib"></div></div></div></div><br><p><br></p></li><li style="font-size: 16px;"><div data-type="file" data-node-type="media" data-width="1044" data-height="716" data-id="dfecb602-d008-4e83-ac16-a65e48e8acf8" data-collection="contentId-390594588" data-file-name="image-20250502-024926.png" data-file-size="97961" data-file-mime-type="image/png" data-alt="image-20250502-024926.png" data-renderer-start-pos="187" data-ssr-placeholder="nouWf:Eb7Gh:EfLS5:4y5Pz:qz-Pe:F4Zdx-0" data-context-id="390594588"><div data-testid="media-card-view" data-media-vc-wrapper="true"><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper">Once completed the window will exit<div data-testid="media-card-view" data-media-vc-wrapper="true"><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper"><br></div></div></div><br></div></div></div></div></li><li style="font-size: 16px;" id="isPasted"><p data-renderer-start-pos="193">Cycle the power by removing and reinserting the <span data-highlighted="true" data-vc="highlighted-text">USB-C</span> connected to the eBoost3.</p><ol data-indent-level="2" start="1" style="font-size: initial;"><li style="font-size: 16px;"><p data-renderer-start-pos="272">Check the screen is active and shows the boost gauge</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="329">Check the boost gauge needle moves to about 0</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="376">You are half way there, in the next step you will install the I/O board firmware using the eBoost unit itself !</p><div data-testid="media-card-view" data-media-vc-wrapper="true"><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper"><strong><span style="font-size: 16px;">At this point the eBoost will likely be showing incorrect pressure sensor readings (Full Vacuum). That&apos;s normal - follow the remaining steps to complete the firmware upgrade.</span></strong><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper"><br></div></div><br></div></div></div></li></ol></li><li><p data-renderer-start-pos="376" id="isPasted">&#xA0;Using the eBoost&apos;s on screen display navigate to Settings-&gt;System-&gt;I/O Firmware<img data-fr-image-pasted="true" src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025081805-e2cb8b43-4a41-435d-b20b-e79155232c6b-0137018b-f5f6-4f61-a7ea-6b69d7898d27.png" id="isPasted" class="fr-fic fr-dii" style="width: 286px;"><br><br><br></p></li><li style="font-size: 16px;"><div data-type="file" data-node-type="media" data-width="1044" data-height="716" data-id="dfecb602-d008-4e83-ac16-a65e48e8acf8" data-collection="contentId-390594588" data-file-name="image-20250502-024926.png" data-file-size="97961" data-file-mime-type="image/png" data-alt="image-20250502-024926.png" data-renderer-start-pos="187" data-ssr-placeholder="nouWf:Eb7Gh:EfLS5:4y5Pz:qz-Pe:F4Zdx-0" data-context-id="390594588"><div data-testid="media-card-view" data-media-vc-wrapper="true"><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper">You will notice there is now a difference between the &quot;Current&quot; and &quot;Available&quot; firmware in the I/O Firmware menu. Clicking &quot;okay&quot; will install the new I/O firmware into your eBoost3<div data-testid="media-card-view" data-media-vc-wrapper="true"><div data-testid="media-file-card-view" data-test-status="complete" data-test-source="remote" data-test-media-name="image-20250502-024926.png" data-test-progress="1"><div data-testid="ImageRendererWrapper"><br></div></div></div></div></div></div></div></li><li style="font-size: 16px;"><p data-renderer-start-pos="376">Wait for update to complete</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="376">Cycle power</p></li><li style="font-size: 16px;"><p data-renderer-start-pos="376">the I/O Firmware Current and Available should now match, this signals that the latest firmware has been now written to the eBoost3 and the unit is now fully updated.</p></li></ol><p><br></p><p><br></p>

TS-0311-100X - eBoost 3 Firmware Update

Take full control of your turbocharged setup with the eBoost3, the ultimate evolution in boost management technology.  Building on the legendary performance of the eBoost2, the eBoost3 delivers precision control, powerful features, and a state-of-the

<p><span style="font-size: 14px;">Take full control of your turbocharged setup with the eBoost3, the ultimate evolution in boost management technology. &#xA0;Building on the legendary performance of the eBoost2, the eBoost3 delivers precision control, powerful features, and a state-of-the-art interface&#x2014;making it the go-to solution for both street and race applications. Housed in a billet aluminum gauge body with a high-resolution full-colour LCD display and a rotating click bezel for instant, onthe-fly adjustments, the eBoost3 offers virtually limitless control over your forced induction system. Whether you&#x2019;re running single or twin solenoids, CO&#x2082; systems, or electronic wastegates, the eBoost3 adapts to any setup and keeps you in command.</span></p><p><br></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026041602-e989aef9-a76e-4400-a92e-88da8923b4c0-eboost3_data.jpg" style="width: 683px;" class="fr-fic fr-dib"></p><p><br></p><p><span style="font-size: 14px;"><strong id="isPasted">Features</strong></span></p><ul><li><span style="font-size: 14px;">Billet Aluminium Housing&#xA0;</span></li><li><span style="font-size: 14px;">Up to six programmable stages of boost by gear, RPM, time, or custom input&#xA0;</span></li><li><span style="font-size: 14px;">Integrated 3bar boost pressure sensor&#xA0;</span></li><li><span style="font-size: 14px;">Auxiliary Outputs for water spray, methanol or nitrous injection, shift lights, warning lights, and more&#xA0;</span></li><li><span style="font-size: 14px;">Display and log critical data like RPM, Boost and Input Data&#xA0;</span></li><li><span style="font-size: 14px;">Customisable over-boost shutdown and peak boost recall&#xA0;</span></li><li><span style="font-size: 14px;">Logical menu navigation with quick adjustments via the rotating bezel.&#xA0;</span></li></ul><p><span style="font-size: 14px;"><strong id="isPasted">Included in the Box</strong></span></p><ul><li><span style="font-size: 14px;">eBoost 3</span></li><li><span style="font-size: 14px;">Plumbing</span></li><li><span style="font-size: 14px;">Bracket</span></li><li><span style="font-size: 14px;">Wiring</span></li><li><span style="font-size: 14px;">12.7-Watt Solenoid</span></li><li><span style="font-size: 14px;">Sticker</span></li><li><span style="font-size: 14px;">Instruction Card<br></span></li></ul><p><span style="font-size: 14px;"><strong>Tools / Part Req.</strong></span></p><ul><li><span style="font-size: 14px;">Basic Electronic Tools</span></li><li><span style="font-size: 14px;">Heat Shrink</span></li><li><span style="font-size: 14px;">Electrical Tape</span></li><li><span style="font-size: 14px;">USB C Cable&#xA0;<br></span></li></ul><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th><strong>Power Supply</strong></th><th><br></th></tr></thead><tbody><tr><td style="width: 50.0000%;">Operating Voltage&#xA0;</td><td style="width: 50.0000%;">7.0 to 18.0 Volts DC&#xA0;</td></tr><tr><td style="width: 50.0000%;">Operating Current</td><td style="width: 50.0000%;">&lt;1.0A at 14.0V</td></tr><tr><td style="width: 50.0000%;">Polarity Protection&#xA0;</td><td style="width: 50.0000%;">Yes, with Zero Current Draw</td></tr></tbody></table><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th><strong>Inputs</strong></th><th><br></th><th><br></th></tr></thead><tbody><tr><td style="width: 33.3333%;">Manifold Absolute&#xA0;</td><td style="width: 33.3333%;">-80 kPaG&#xA0;</td><td style="width: 33.3333%;">300 kPaG&#xA0;</td></tr><tr><td style="width: 33.3333%;">Pressure Sensor&#xA0;</td><td style="width: 33.3333%;">23.6inHg<br>-0.8 Bar&#xA0;</td><td style="width: 33.3333%;">43 psiG&#xA0;<br>3 Bar&#xA0;</td></tr><tr><td style="width: 33.3333%;">RPM Input&#xA0;</td><td style="width: 33.3333%;">Rising Edge<br>Falling Edge&#xA0;</td><td style="width: 33.3333%;">3.5V&#xA0;<br>1.5V</td></tr><tr><td style="width: 33.3333%;">Switch Input 1&#xA0;</td><td style="width: 33.3333%;">Switched to Ground&#xA0;</td><td style="width: 33.3333%;"><br></td></tr><tr><td style="width: 33.3333%;">Switch Input 2 &#xA0;</td><td style="width: 33.3333%;">Switched to Ground&#xA0;</td><td style="width: 33.3333%;"><br></td></tr></tbody></table><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th><strong>Outputs</strong></th><th><br></th><th><br></th></tr></thead><tbody><tr><td style="width: 33.3333%;">Solenoid PWM Output&#xA0;</td><td style="width: 33.3333%;">25&#xA0;</td><td style="width: 33.3333%;">Hertz&#xA0;</td></tr><tr><td style="width: 33.3333%;">Auxiliary Output 1 &#xA0;</td><td style="width: 33.3333%;">2</td><td style="width: 33.3333%;">Amps Max&#xA0;</td></tr></tbody></table><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th><strong>Interface</strong></th></tr></thead><tbody><tr><td style="width: 100.0000%;">400x400 LCD Screen&#xA0;</td></tr><tr><td style="width: 100.0000%;">Triad button Configuration&#xA0;</td></tr><tr><td style="width: 100.0000%;">360 Deg 18 Detent Rotary Encoder</td></tr><tr><td style="width: 100.0000%;">9 Customisable RGB LED&#xA0;</td></tr></tbody></table><p><br></p><table style="width: 100%;"><thead><tr><th><strong>Communications</strong></th><th><br></th></tr></thead><tbody><tr><td style="width: 50.0000%;">USB&#xA0;</td><td style="width: 50.0000%;">Yes, USB C&#xA0;</td></tr></tbody></table><p><br></p><table style="width: 100%;"><thead><tr><th><strong>Thermal Data</strong></th><th><br></th></tr></thead><tbody><tr><td style="width: 50.0000%;">Operating Temperature Range</td><td style="width: 50.0000%;">-10 to 70&#xB0;C (14 to 158&#xB0;F)</td></tr></tbody></table><p><br></p><table style="width: 100%;"><thead><tr><th><strong>Material Data</strong></th><th><br></th></tr></thead><tbody><tr><td style="width: 50.0000%;">Beryllium (Be)&#xA0;</td><td style="width: 50.0000%;">0%</td></tr><tr><td style="width: 50.0000%;">Actuator housing&#xA0;</td><td style="width: 50.0000%;">6262 T6 anodised Al.&#xA0;</td></tr></tbody></table><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th><strong>Order Data</strong></th><th><br></th></tr></thead><tbody><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eboost3-3-bar-60mm-black/" style=" text-decoration: none;" id="isPasted">TS-0311-1002</a></td><td style="width: 50.0000%;">eBoost 3 3Bar 60mm Black&#xA0;</td></tr><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eboost3-3-bar-60mm-silver/" style=" text-decoration: none;" id="isPasted">TS-0311-1000</a></td><td style="width: 50.0000%;">eBoost 3 3Bar 60mm Silver</td></tr></tbody></table><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th><strong>Accessories</strong></th><th><br></th></tr></thead><tbody><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eb2-60mm-dash-mounting-kit/" target="_blank" rel="noopener noreferrer">TS-0301-2001</a></td><td style="width: 50.0000%;">eB 60mm Dash Mounting Kit&#xA0;</td></tr><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eb2-60mm-roll-cage-mount/" target="_blank" rel="noopener noreferrer">TS-0301-2002</a></td><td style="width: 50.0000%;">eB 60mm Roll Cage Mount&#xA0;</td></tr><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eb2-4-port-solenoid/" target="_blank" rel="noopener noreferrer">TS-0301-2003</a></td><td style="width: 50.0000%;">Solenoid Kit &#x2013; 4 Port (Suits eBoost 4 Port Solenoid)&#xA0;</td></tr><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eb2-microswitch/" target="_blank" rel="noopener noreferrer">TS-0301-2012</a></td><td style="width: 50.0000%;">eB Microswitch</td></tr><tr><td style="width: 50.0000%;"><a href="https://www.turbosmart.com/product/eb2-re-loom-kit/" target="_blank" rel="noopener noreferrer">TS-0301-3002</a></td><td style="width: 50.0000%;">eB Re-Loom Kit&#xA0;</td></tr><tr><td style="width: 50.0000%;">TS-0301-3007</td><td style="width: 50.0000%;">3 Port 12.7W Boost Control Solenoid</td></tr></tbody></table><p><br></p><table style="width: 100%;" class="fr-alternate-rows"><thead><tr><th style="width: 5.9297%;"><div style="text-align: center;"><strong>PIN</strong></div></th><th style="width: 24.4441%;"><div style="text-align: center;"><strong>CHANNEL NAME</strong></div></th><th style="width: 36.9098%;"><div style="text-align: center;"><strong>DESCRIPTION</strong></div></th><th style="width: 12.055%;"><div style="text-align: center;"><strong>COLOUR</strong></div></th><th style="width: 20.5951%;"><div style="text-align: center;"><strong>COMPULSORY FOR BASIC OPERATION</strong></div></th></tr></thead><tbody><tr><td style="width: 5.9297%;"><div style="text-align: center;">A1</div></td><td style="width: 24.4441%;"><div style="text-align: center;">12V Switched</div></td><td style="width: 36.9098%;"><div style="text-align: center;">12V from Ignition Source</div></td><td style="width: 12.055%;"><div style="text-align: center;"><span style="color: rgb(255, 0, 0);">Red</span></div></td><td style="width: 20.5951%;"><div style="text-align: center;">Yes</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A2</div></td><td style="width: 24.4441%;"><div style="text-align: center;">Ground</div></td><td style="width: 36.9098%;"><div style="text-align: center;">Chassis, earth or Ground</div></td><td style="width: 12.055%;"><div style="text-align: center;">Black</div></td><td style="width: 20.5951%;"><div style="text-align: center;">Yes</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A3</div></td><td style="width: 24.4441%; text-align: center;">Solenoid PWM</td><td style="width: 36.9098%; text-align: center;">PWM Pulsed output for Solenoid</td><td style="width: 12.055%; text-align: center;"><span style="color: rgb(150, 75, 0);">Brown</span></td><td style="width: 20.5951%; text-align: center;">Yes</td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A4</div></td><td style="width: 24.4441%; text-align: center;">Solenoid Power Supply</td><td style="width: 36.9098%; text-align: center;">12V supply for Solenoid</td><td style="width: 12.055%; text-align: center;"><span style="color: rgb(128, 128, 128);">Grey</span></td><td style="width: 20.5951%; text-align: center;">Yes</td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A5</div></td><td style="width: 24.4441%;"><div style="text-align: center;">RPM Input</div></td><td style="width: 36.9098%;"><div style="text-align: center;">Input signal from ECU</div></td><td style="width: 12.055%;"><div style="text-align: center;"><span style="color: rgb(247, 218, 100);">Yellow</span></div></td><td style="width: 20.5951%;"><div style="text-align: center;">No</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A6</div></td><td style="width: 24.4441%;"><div style="text-align: center;">Auxiliary Output 1</div></td><td style="width: 36.9098%;"><div style="text-align: center;" id="isPasted">Auxiliary Output 1 - switched to ground</div></td><td style="width: 12.055%;"><div style="text-align: center;">White</div></td><td style="width: 20.5951%;"><div style="text-align: center;">No</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A7</div></td><td style="width: 24.4441%;"><div style="text-align: center;">External Switch Input 1</div></td><td style="width: 36.9098%;"><div style="text-align: center;" id="isPasted">External Switch Input 1</div></td><td style="width: 12.055%;"><div style="text-align: center;"><span style="color: rgb(97, 189, 109);">Green</span></div></td><td style="width: 20.5951%;"><div style="text-align: center;">No</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">A8</div></td><td style="width: 24.4441%;"><div style="text-align: center;" id="isPasted">External Switch Input 2</div></td><td style="width: 36.9098%;"><div style="text-align: center;" id="isPasted">External Switch Input 2</div></td><td style="width: 12.055%;"><div style="text-align: center;"><span style="color: rgb(251, 160, 38);">Orange</span></div></td><td style="width: 20.5951%;"><div style="text-align: center;">No</div></td></tr></tbody></table><p><br></p><table style="width: 100%;" id="isPasted"><thead><tr><th style="width: 5.9297%;"><div style="text-align: center;"><strong>PIN</strong></div></th><th style="width: 24.4441%;"><div style="text-align: center;"><strong>CHANNEL NAME</strong></div></th><th style="width: 36.896%;"><div style="text-align: center;"><strong>DESCRIPTION</strong></div></th><th style="width: 11.9132%;"><div style="text-align: center;"><strong>COLOUR</strong></div></th><th style="width: 20.7369%;"><div style="text-align: center;"><strong>COMPULSORY FOR BASIC OPERATION</strong></div></th></tr></thead><tbody><tr><td style="width: 5.9297%;"><div style="text-align: center;">B1</div></td><td style="width: 24.4441%;"><div style="text-align: center;">5V Supply</div></td><td style="width: 36.896%;"><div style="text-align: center;">5V for Sensors</div></td><td style="width: 11.9132%;"><div style="text-align: center;" id="isPasted"><span style="color: rgb(251, 160, 38);">Orange</span></div></td><td style="width: 20.7369%;"><div style="text-align: center;">No</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">B2</div></td><td style="width: 24.4441%;"><div style="text-align: center;">Sensor Ground</div></td><td style="width: 36.896%;"><div style="text-align: center;" id="isPasted">Sensor Ground</div></td><td style="width: 11.9132%;"><div style="text-align: center;">Black</div></td><td style="width: 20.7369%;"><div style="text-align: center;">No</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">B3</div></td><td style="width: 24.4441%; text-align: center;">CAN High</td><td style="width: 36.896%; text-align: center;">CAN Bus High Line (Twisted Pair)</td><td style="width: 11.9132%; text-align: center;"><div style="text-align: center;" id="isPasted"><span style="color: rgb(247, 218, 100);">Yellow</span></div></td><td style="width: 20.7369%; text-align: center;">No</td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">B4</div></td><td style="width: 24.4441%; text-align: center;">Analog Voltage Input 1</td><td style="width: 36.896%; text-align: center;">Analog Voltage Input 1</td><td style="width: 11.9132%; text-align: center;"><span style="color: rgb(128, 0, 128);">Purple</span></td><td style="width: 20.7369%; text-align: center;">No</td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">B5</div></td><td style="width: 24.4441%;"><div style="text-align: center;">PWM Output 1</div></td><td style="width: 36.896%;"><div style="text-align: center;">PWM Output 1</div></td><td style="width: 11.9132%;"><div style="text-align: center;"><span style="color: rgb(255, 192, 203);">Pink</span></div></td><td style="width: 20.7369%;"><div style="text-align: center;">No</div></td></tr><tr><td style="width: 5.9297%;"><div style="text-align: center;">B6</div></td><td style="width: 24.4441%;"><div style="text-align: center;">Can Low</div></td><td style="width: 36.896%;"><div style="text-align: center;">Can Bus Low Line (Twisted Pair)</div></td><td style="width: 11.9132%;"><div style="text-align: center;"><span style="color: rgb(0, 100, 0);">Dark Green</span></div></td><td style="width: 20.7369%;"><div style="text-align: center;">No</div></td></tr></tbody></table><p><br></p><p><span style="font-size: 14px;">Viewed from back of unit. (Back of connector)&#xA0;</span></p><p><span style="font-size: 14px;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026041604-3eac6526-20c4-47f7-bc19-ddca58e1757a-screenshot%202026-04-16%20at%202.06.34%E2%80%AFpm.png" style="width: 683px;" class="fr-fic fr-dib"></span></p><p><br></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026041604-88115b6b-5d87-49c7-a955-4ec2ee16bdf8-screenshot%202026-04-16%20at%202.07.13%E2%80%AFpm.png" style="width: 683px;" class="fr-fic fr-dib"></p><p><br></p><p><span style="font-size: 18px;"><strong>RELATED VIDEO</strong></span></p><p><iframe width="560" height="315" src="https://www.youtube.com/embed/vucAM9tXaKw?si=Jnu0FgR1d1cbrSXU" title="YouTube video player" frameborder="0" allowfullscreen></iframe></p>

eBoost 3 Data Sheet

Turbosmart

eBoost 3

Product Instructions

Boost Control

Electronic

BigBubba BPV/ Bubba Sonic VTA Instructions

Big Bubba

TS-0223-1082 / TS-0223-1282  EM Series Diverter Valve VR19

TS-0223-1296 - EM Series Diverter Valve VR13

TS-0225-1202 - F150 EM Series Diverter Valve

TS-0223-1292 - EM Series Diverter Valve VR9

TS-0223-1X83 - EM Series Diverter Valve VR20

TS-0223-1X88 - BOV Kompact EM Dual Port VR5 - Instructions

TS-0223-1082 - BOV Kompact EM Series - Instructions

TS-0223-1055- BOV Kompact EM Series - Instructions

BOV Kompact EM Series - Solenoid Instructions

TS-0223-1255 - BPV Kompact EM Series - Instructions

TS-0223-1266 - EM Series Diverter Valve VR2

TS-0223-1278 - EM Series Diverter Valve VR22

TS-0223-1X64 - EM Series Diverter Valve VR30

TS-0223-1X48 - EM Series Diverter Valve VR58 Gen 3 B58

TS-0223-1041 & TS-0223-1241 - EM Series Diverter Valve VR32 Dodge Ram

TS-0223-1041 & TS-0223-1241 EM Series Diverter Valve VR32 Dodge Ram HIGH OUTPUT

TS-0225-1001 BOV Kompact EM F150

TS-0225-1202 EM SERIES DIVERTER VALVE F150

TS-0223-1087 & TS-0223-1287 EM SERIES DIVERTER VALVE VR7

Kompact EM Valves

GenV RacePort Blow Off Valve Instructions

GenV RacePort EM Blow Off Valve Instructions

GenV RacePort Plumb back Blow Off Valve Data Sheet

GenV RacePort Blow Off Valve Data Sheet

GenV RacePort EM Blow Off Valve Data Sheet

Raceport

GenV ProPort Blow Off Valve Instructions

Proport

Vee Port Pro Instructions

Mazda / Subaru Dual Port Instructions

BOV 5

RacePort

ProPort

PowerPort

Kompact

Kompact EM

Bov5 Accessories

BigBubba

Blow-off Valve Spares

TS-0304-100X - Electronic BOV Controller

BOV Controller

TS-0203-1018 - BOV Kompact Hyundai Genesis

TS-0203-1036 - BOV Kompact Hyundai i30N, Kona N & Veloster N

TS-0203-1217- BOV Kompact Civic Type R

TS-0203-122X - Kompact Universal Plumback BOV

Blow-Off Valves

FUEL PRESSURE REGULATORS INSTRUCTIONS

Standard Range

FPR Pro Series

Pro Series

FPRF Filter

Inline Fuel Filter

Filter

Fuel Pressure Regulators

UltraGate38 Spares & Accessories

UltraGate38

CompGate40 Spares & Accessories

CompGate40

HyperGate45 Spares & Accessories

HyperGate45 Lite

HyperGate45

ProGate50 Spares & Accessories

ProGate50

Spares

PowerGate60

Pneumatic

Compressed Gas

Modular Straight Gate

Straight Gate

Gas Valve Actuator

Gas Valve Actuators

Compressed Gas / CO2 External Wastegate Instructions

Compressed Gas Wastegate

External Wastegates

TS-0620-4012 - TS-0620-4014 - GenV IWG (Twin Port) Wastegate Actuator Suit BorgWarner EFR 14psi - Instructions

TS-0625-3143 -GenV IWG (Twin Port) Wastegate Actuator Suit Garrett G25 14 Psi - Instructions

Internal Wastegate Actuators

eBG50/76 Electronic Boost Gate

Compressed Gas (CO2) Boost Gate - TS-026X-12X2

BoostGate

Raceport EM

Charge Air Control

Turbocharger Instructions

TS-199-30XX - Turbo Adapters

Accessories

Turbocharger

TS-0305-1001 - BlackBox Electronic Wastegate Controller - Instructions

Vehicle Specific Diagrams

Manual

Fuel Cut Defenders

Ranger Raptor Intercooler

TS-CCA-VSFD001S/B - Performance Intercooler Upgrade Suit Ford F150 EcoBoost

TS-CCA-VSFD002S/B - Performance Intercooler Upgrade Suit Ford Ranger Raptor

Ford

Intercooler

TS-0804-1004 Turbocharger Direct Mount Oil Filter 44um - Banjo AN-4

OPR V2

ProOPR

TS-0804-1004 - Turbocharger Direct Mount Oil Filter

TS-0891-0XXX - Oil Caps

Oil Cap

Oil Management

TS-0701-2011 - Electrical EGT Gauge - Instructions

TS-0101-2023 - Vacuum - 30 PSI Boost Gauge

TS-0704-1X01- CO2 Manifold

TS-0705-1001 - Exhaust Manifold Pressure Dampener

Reference and Sensor Blocks

Gauges

GenV Wastegate  Standard / Motorsport / High Pressure Instructions

Spring Pressure - GEN4 WG 38/40/45/50 Lite & IWG

Spring Pressure Chart GENV HP WG38/40/45

Spring Pressure Chart - GEN4 WG 50 and 60

Spring Charts

How to create an account?

My order was marked delivered but it’s not here.

What do I do if I receive the wrong item in my order?

How long does delivery take?

Website Support

TS 2021 Catalogue

Brand Assets