Product Name: FPRF Filter. Product Description:      Fuel Pressure Regulator Filter 6/8/10. Product Number:           TS-0404-15XX. IMPORTANT NOTES ON YOUR FUEL PRESSURE REGULATOR. Non-marking spanners to tighten fittings. Allen Key Set. Please check

<p id="isPasted"><br></p><table cellpadding="0" cellspacing="0" width="100%"><tbody><tr><td><p>Product Name: <strong>FPRF Filter</strong></p><p>Product Description: &#xA0; &#xA0; &#xA0;Fuel Pressure Regulator Filter 6/8/10</p><p>Product Number: &#xA0; &#xA0; &#xA0; &#xA0; &#xA0; TS-0404-15XX</p></td></tr></tbody></table><p>&#xA0;&#xA0;</p><p>IMPORTANT NOTES ON YOUR FUEL PRESSURE REGULATOR</p><ul><li style="text-align: justify; font-size: 16px;"><strong>Do NOT remove or adjust the collar.</strong></li><li style="text-align: justify; font-size: 16px;">Turbosmart accepts no responsibility whatsoever for incorrect installation of this product which is potentially hazardous and can&#xA0;cause serious engine damage or personal injury. Ensure there are no leaks in your fuel system after installation and you have&#xA0;checked fuel suitability.</li><li style="text-align: justify; font-size: 16px;">Use only high-quality fittings ensuring maximum sealing reliability. Optional Turbosmart fitting kit available.</li><li style="text-align: justify; font-size: 16px;">Ensure that all plumbing is appropriately secured, is the correct size and chemical rating for your application when fitting your FPRF.</li><li style="text-align: justify; font-size: 16px;">Ensure to relieve fuel pressure before removing OEM Fuel Pressure Regulator</li><li style="text-align: justify; font-size: 16px;">Your fuel pressure regulator should be mounted at least 100mm from any significant heat source.</li><li style="text-align: justify; font-size: 16px;">The internal filter should be <strong>replaced&#xA0;</strong>at regular fuel filter change intervals. Failure to clear filter of particulates may restrict fuel flow change the regulated pressure</li><li style="text-align: justify; font-size: 16px;">Gauge port is 1/8&#x201D; NPT.</li><li style="text-align: justify; font-size: 16px;">All FPR&apos;s can be mounted in any direction.</li></ul><p>&#xA0;</p><p>&#xA0;</p><h2 id="recommendations">RECOMMENDATIONS</h2><ul><li style="font-size: 16px;"><strong>Turbosmart recommends that your fuel pressure regulator (FPR) is fitted by an appropriately qualified technician</strong></li><li style="font-size: 16px;"><strong>Turbosmart recommends that the engine Air-Fuel ratio checked once fuel pressure is set.</strong></li><li style="font-size: 16px;">Optional Turbosmart Fuel Filter Kits: TS-0402-3101</li></ul><p>&#xA0;</p><p><br></p><h1 id="how-to-install-your-fuel-pressure-regulator">HOW TO INSTALL YOUR FUEL PRESSURE REGULATOR</h1><h2 id="tools-required">TOOLS REQUIRED</h2><p>Non-marking spanners to tighten fittings.</p><p>Allen Key Set</p><h2 id="kit-contents">KIT CONTENTS</h2><p>Please check that the following items have been provided in your FPRF kit.</p><p>&#xA0;</p><table border="0" cellspacing="0" cellpadding="0" width="661"><tbody><tr><td valign="top" style="width: 9.98487%;"><p><strong>Quantity</strong></p></td><td valign="top" style="width: 29.9546%;"><p><strong>Description</strong></p></td><td valign="top" style="width: 60.0605%;"><p><strong>Use</strong></p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>1</p></td><td valign="top" style="width: 29.9546%;"><p>Turbosmart FPRF</p></td><td valign="top" style="width: 60.0605%;"><p>Main unit</p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>3</p></td><td valign="top" style="width: 29.9546%;"><p><span lang="EN-US">M6 Mounting Screws</span>&#xA0;</p></td><td valign="top" style="width: 60.0605%;"><p>Secures the mounting bracket to panel in car</p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>1</p></td><td valign="top" style="width: 29.9546%;"><p>Mounting Bracket</p></td><td valign="top" style="width: 60.0605%;"><p>Mounting bracket used for remote mounting the FPRF</p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>1</p></td><td valign="top" style="width: 29.9546%;"><p>Turbosmart Sticker</p></td><td valign="top" style="width: 60.0605%;"><p>Turbosmart sticker</p></td></tr></tbody></table><p>&#xA0;</p><p>&#xA0;</p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025091103-53e2d9c7-dc14-44df-899e-561b4a5228ac-9baa660f-6c61-4f07-bf71-1a835846aec7.png" style="width: 1202px;" class="fr-fic fr-dib"></p><h2 id="fprf-filter-overview">FPRF Filter OVERVIEW&#xA0;</h2><p><br></p><p><br></p><p>&#xA0;<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025091103-4c232edf-ae4c-4a83-908e-f7669e19f820-9cf628ea-f454-45f9-8da6-ec3ae7bef03d.png" style="width: 1265px;" class="fr-fic fr-dib"></p><h2 id><br></h2><p><strong>&#xA0; &#xA0; &#xA0; &#xA0; &#xA0; &#xA0;&#xA0;</strong></p><p>&#xA0;</p><p><br></p><p><br></p><p><br></p><p><strong>&#xA0;</strong></p><p><strong><br>&#xA0;</strong></p><h2 id="_Toc85459239">FITTING YOUR FPRF</h2><p style="text-align: left;">Locate fuel pressure feed line, base pressure and determine mounting location</p><p style="text-align: left;"><span style="font-size: 16px;">This line is usually found by identifying your injectors, the fuel rail the injectors are mounted to and then the line that is feeding the fuel rail. Turbosmart recommends determining your current base fuel pressure with your existing regulator to identify a reference for the base pressure you set the new regulator to. This can be done with any reputable pressure gauge at idle and with the vacuum hose disconnected from the regulator. Take time to determine where you wish to mount the FPRF in the engine bay.&#xA0;</span></p><p style="text-align: left;"><span style="font-size: 16px;">&#xA0;</span></p><p><strong>CAUTION!</strong></p><p><strong>Do not place the FPRF near a significant heat source as this may lead to severe engine fires.</strong></p><p><strong>CAUTION!</strong></p><p><strong>Ensure to relieve fuel pressure before removing OEM Fuel Pressure Regulator</strong></p><p>&#xA0;</p><h2 id="prepare-fprf-for-installation">Prepare FPRF for installation</h2><p>Prior to mounting the FPRF, install fittings into FPRF with high quality AN ORB fittings<a id="_anchor_3" href="#_msocom_3" language="JavaScript" name="_msoanchor_3"></a> ensuring the O-Ring is present. The FPRF Filtered Regulator must be plumbed up using the logic supplied on the Regulator. It&apos;s graphically represented below.&#xA0;</p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025091203-87cc5393-ece0-42ca-966f-003af46c6d34-3a68811c-5e0f-4615-a353-9e909ba3fb46.png" style="width: 1354px;" class="fr-fic fr-dib"></p><p><br></p><p><br></p><table style="width: 49%; margin-right: calc(51%);"><tbody><tr><td style="width: 5.0736%;">Stage</td><td style="width: 21.5076%;">Translation</td><td style="width: 14.0333%;">Description</td><td style="width: 12.7794%;">Pressure</td><td style="width: 21.8261%;">Filtered</td><td style="width: 24.5703%;">Fitting Size</td></tr><tr><td style="width: 5.0736%;">1</td><td style="width: 21.5076%;">Tank &#x2191;</td><td style="width: 14.0333%;">Feed From Pump</td><td style="width: 12.7794%;">Yes</td><td style="width: 21.8261%;">No</td><td style="width: 24.5703%;">-10 ORB</td></tr><tr><td style="width: 5.0736%;">2</td><td style="width: 21.5076%;">Rail &#x2193;</td><td style="width: 14.0333%;">Rail In</td><td style="width: 12.7794%;">Yes</td><td style="width: 21.8261%;">Between Tank &#xA0;&#x2191; and Rail Down &#x2193;</td><td style="width: 24.5703%;">-10 ORB</td></tr><tr><td style="width: 5.0736%;">3</td><td style="width: 21.5076%;">Rail &#x2191;</td><td style="width: 14.0333%;">Rail Out</td><td style="width: 12.7794%;">Yes</td><td style="width: 21.8261%;"><br></td><td style="width: 24.5703%;">-10 ORB</td></tr><tr><td style="width: 5.0736%;">4</td><td style="width: 21.5076%;">Tank &#x2193;</td><td style="width: 14.0333%;">Return to Tank</td><td style="width: 12.7794%;">No</td><td style="width: 21.8261%;"><br></td><td style="width: 24.5703%;">-10 ORB</td></tr></tbody></table><p><br></p><p><strong>Optional Dead Head Hookup</strong></p><p><br></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2026062523-1b3903f1-d5d8-4ace-9d5f-e1fa4c1fe363-b3966023-16ef-4154-a98f-50ddf93dc9e0.png" style="width: 1411px;" class="fr-fic fr-dib">&#xA0;</p><p><strong>CAUTION!</strong></p><p><strong>Flare fittings CANNOT be used internally on the FPRF. They must be ORB internally.</strong></p><p><br></p><p>&#xA0;<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025091105-029002c9-76f2-49cf-894e-d93f6114274c-5a17748e-7d14-4661-b840-4bc9a05e6a93.png" style="width: 550px;" class="fr-fic fr-dib"></p><p>&#xA0;</p><p><br></p><p><strong>CAUTION!</strong></p><p><strong>Ensure correct installation of fittings to prevent high pressure and temperature fuel leaks which can lead to extremely dangerous fires. See across for example of ORB fitting &#x2013; note the O-ring.</strong></p><p><br></p><h2 id="fit-gauge-or-sensor-port-optional-or-blank-notoptional">Fit Gauge or Sensor Port (OPTIONAL) or Blank (<strong>NOT&#xA0;</strong>Optional)</h2><p>Fitting a gauge or sensor is optional, however the blanks <strong>must</strong> be used in one or two of the ports. Prior to mounting the FPRF, install 1/8&#x201D; NPT gauge or sensor. Unscrew existing 1/8&#x201D; NPT blank anti-clockwise with 3/16&#x201D; hex key. Apply thread lubricant and screw in clockwise until finger tight, then tighten further 1-2 turns for seal. Turbosmart gauge kit optional &#x2013; TS-0402-2023<a id="_anchor_4" href="#_msocom_4" language="JavaScript" name="_msoanchor_4"></a>.</p><p><strong>Note: That there are two options for the gauge port. The unused sensor port should be blocked. Both measure the same pressure, the preference on which port should be whatever benefits the mounting of the sensor.&#xA0;</strong></p><p>&#xA0;</p><p><br></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025082706-ffc0d476-f7c8-4e7b-9425-d07ca47b241a-c7bc2778-3683-43e4-a27f-12f1af98b965.png" style="width: 555px;" class="fr-fic fr-dib"></p><p><br></p><h2 id="mounting-your-fprf">Mounting your FPRF</h2><p>With all fittings installed onto the FPRF, the FPRF can now be mounted. The mounting bracket is held on with 3x M6 Allen key screws. A 4mm Allen key is required to secure the regulator to the clamp 5N/mm is required to mount the regulator to the bracket. The mounting bracket is now successfully installed, and you can now mount your FPRF in your specified location. Proceed to connect your fuel lines. ORB fittings should be torqued to 5N/mm and the Fitler cup to 20N/mm</p><p>&#xA0;</p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025091105-37198281-072a-45fc-a5e6-b9c09a5507cc-032a7713-348d-4a26-883f-7275b0f09e7c.png" style="width: 875px;" class="fr-fic fr-dib"></p><p><br></p><p><strong>Start engine and check for leaks</strong></p><p>Congratulations, your FPRF is installed and ready for use. Double check all fittings, lines and mountings then proceed to activate fuel pumps and check for leaks.</p><p><strong>CAUTION!&#xA0;</strong></p><p><strong>Engine may run rough with incorrect base fuel pressure.&#xA0;</strong></p><p><strong>CAUTION!&#xA0;</strong></p><p><strong>If fuel leaks are present &#x2013; switch off engine immediately and rectify leaks.</strong></p><p><strong id="isPasted">CAUTION!</strong></p><p><strong>An incorrect setting of fuel pressure may cause your engine to run lean with the potential for detonation. Turbosmart recommends air-fuel ratios are checked immediately after base pressure adjustments.</strong></p><p><br></p><h2 id="adjusting-your-fprf">ADJUSTING YOUR FPRF</h2><p>Remove signal reference hose and loosen 10mm locking nut</p><p>Remove vacuum/pressure signal reference hose from nipple and loosen 10mm locking nut<a id="_anchor_10" href="#_msocom_10" language="JavaScript" name="_msoanchor_10"></a> on top of FPR anti-clockwise to allow for free movement of the adjuster screw.</p><p><br></p><h2 id="-1"><br></h2><h2 id="adjust-base-pressure">Adjust base pressure</h2><p>Ensure battery voltage is sufficient and idle engine. Observe the base pressure on the gauge or your data logging device, turn the adjuster with a 3mm hex tool clockwise to increase fuel pressure and anti-clockwise to decrease fuel pressure.&#xA0;</p><p>&#xA0;<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025062302-c730efa0-f3dd-455a-bedf-2954595ae066-03edee72-deb5-4c0f-9884-016835654344.png" style="width: 728px;" class="fr-fic fr-dib"></p><p><br></p><p>&#xA0;</p><p><strong>CAUTION!</strong></p><p><strong>Avoid screwing adjuster in forcefully as this will not allow for the device to regulate fuel pressure and can cause damage to your fuel pumps</strong></p><p><br></p><h2 id="tighten-10mm-locking-nut-and-reconnect-signal-reference-hose">Tighten 10mm locking nut and reconnect signal reference hose</h2><p>Once base pressure has been successfully set, reconnect the signal reference hose and tighten the 10mm locking nut preventing the adjuster screw from self-adjusting. Your FPRF has now been adjusted.</p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025062302-0e84189c-d132-4b7a-bdc9-78dc6636e807-1capture.jpg" style="width: 773px;" class="fr-fic fr-dib"></p><h2 id="isPasted">Servicing your FPRF</h2><p><br></p><p>The FPRF comes with a microglass filter to remove particles flowing to the engine, we&apos;d recommend that the fuel filter be inspected regularly in particularly abnormal environments. However replacing every 10,000km or every 6,000 miles is recommended. When refitting filter cup a fuel safe silicon grease should be used on the O-ring to ensure smooth operation and exceptional sealing. Inspection of o-ring is recommended for splits or tears.&#xA0;</p><p>To remove the filter cup, a 1 inch spanner or -10 AN Spanner is required. Torque to 20N/m (14ft/lbs).</p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025091203-fcd13e45-0486-464b-8d84-65017145b30b-5f1e8688-730c-44b1-a6e2-01c7699659c5.png" style="width: 618px;" class="fr-fic fr-dib"></p><p><br></p><p>&#xA0;</p><p>&#xA0;</p><h2 id="trouble-shooting">TROUBLE SHOOTING</h2><p><strong>&#xA0;</strong></p><ul><li style="font-size: 16px;">FPRF Leaking &#x2013; Check fittings are tight and O-Rings are present or not damaged.</li><li style="font-size: 16px;">FPRF regulating low pressure &#x2013; Wind in adjustment screw, if that is insufficient, ensure no blockage. The Regulator can only regulate with a pressure supplied higher than desired.&#xA0;</li><li style="font-size: 16px;">FPRF regulating above 100/130psi (690/896kPa) &#x2013; Ensure fuel return line is not restricted causing a pressure build up for the regulator.</li><li style="font-size: 16px;">FPRF failing to regulate, possible fuel line blockage.&#xA0;</li><li style="font-size: 16px;">FPRF not holding base pressure &#x2013; Check for blockages, leaks in the system and that fuel pumps are active.</li><li style="font-size: 16px;">Failing the above, submit a technical request to <a href="mailto:tech@turbosmart.com.au">tech@turbosmart.com.au</a> with information of your engine, fuel type and photos of installation</li></ul><p><br></p>

FPRF Filter

<table style="width: 100%;"><tbody><tr><td style="width: 50.0000%;"><strong>Product Name</strong></td><td style="width: 50.0000%;"><strong>Fuel Filters</strong></td></tr><tr><td style="width: 50.0000%;"><strong>Product Description</strong></td><td style="width: 50.0000%;"><strong>Billet/Inline Fuel Filters</strong></td></tr><tr><td style="width: 50.0000%;"><strong>Product Number</strong></td><td style="width: 50.0000%;"><br></td></tr><tr><td style="width: 50.0000%;">TS-0402-1133<br></td><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">6AN Inline Fuel Filter 10um Black*</span><br></td></tr><tr><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">TS-0402-1134</span><br></td><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">8AN Inline Fuel Filter 10um &#xA0;Black*</span><br></td></tr><tr><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">TS-0402-1135</span><br></td><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">10AN Inline Fuel Filter 10um &#xA0;Black*&#xA0;</span><br></td></tr><tr><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">TS-0402-1222</span><br></td><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">Billet Fuel Filter Canister 10um 6AN Black</span><br></td></tr><tr><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">TS-0402-1232</span><br></td><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">Billet Fuel Filter Canister 10um 8AN Black</span><br></td></tr><tr><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">TS-0402-1242</span><br></td><td style="width: 50.0000%;"><style type="text/css" id="isPasted"></style><style type="text/css"></style><span data-sheets-root="1">Billet Fuel Filter Canister 10um 10AN Black</span><br></td></tr></tbody></table><p>&#xA0;&#xA0;</p><p>IMPORTANT NOTES ON YOUR FUEL FILTERS</p><ul><li id="isPasted"><span style=" border-box;font-size: 16px;">Turbosmart accepts no responsibility whatsoever for incorrect installation of this product which is potentially hazardous and can cause serious&#xA0;</span><span style=" border-box;font-size: 16px;">engine damage or personal injury.</span></li><li><span style=" border-box;font-size: 16px;">The internal filter should be cleaned at regular fuel filter change intervals. Failure to clear filter of particulates may restrict fuel flow and change the regulated pressure.&#xA0;</span><span style=" border-box;font-size: 16px;"><br></span></li><li><span style=" border-box;font-size: 16px;">The internal filter should be kept in the same orientation after cleaning to minimise and left-over particles aren&#x2019;t dislodged during normal cleaning operation.&#xA0;</span><span style=" border-box;font-size: 16px;"><br></span></li><li><span style=" border-box;font-size: 16px;">Ensure that all plumbing is appropriately secured.</span>&#xA0;</li></ul><p><br></p><h2 id="recommendations">RECOMMENDATIONS</h2><ul><li id="isPasted"><span style=" border-box;font-size: 16px;">Turbosmart recommends that your fuel filter is fitted by an appropriately qualified technician</span></li><li><span style=" border-box;font-size: 16px;">Turbosmart recommends that your fuel pressure is checked after fitment to ensure fuel pressure is satisfactory.</span></li><li><span style=" border-box;font-size: 16px;">Turbosmart recommends that the fuel pressure are monitored closely.</span></li><li><span style=" border-box;font-size: 16px;">Rebuild kits are available with replacement filters and O-rings, information is located in the datasheet.</span></li></ul><p><br></p><h1 id="how-to-install-your-fuel-filter">HOW TO INSTALL YOUR FUEL FILTER</h1><h2 id="tools-required">TOOLS REQUIRED</h2><p>Non-marking spanners to tighten fittings.</p><p>Allen Key Set</p><h2 id="kit-contents">KIT CONTENTS</h2><p>Please check that the following items have been provided in your Fuel Filter kit.</p><p>&#xA0;</p><table border="0" cellspacing="0" cellpadding="0" width="661" style="margin-right: calc(60%); width: 40%;"><tbody><tr><td valign="top" style="width: 9.98487%;"><p><strong>Quantity</strong></p></td><td valign="top" style="width: 22.3236%;"><p><strong>Description</strong></p></td><td valign="top" style="width: 67.6915%;"><p><strong>Use</strong></p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>1</p></td><td valign="top" style="width: 22.3236%;"><p>Turbosmart Filter</p></td><td valign="top" style="width: 67.6915%;"><p>Main unit</p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>1</p></td><td valign="top" style="width: 22.3236%;"><p>Mounting Bracket</p></td><td valign="top" style="width: 67.6915%;"><p>Mounting bracket used for Filter (If Billet Filter)</p><p>*No Filter supplied with inline filter.&#xA0;</p></td></tr><tr><td valign="top" style="width: 9.98487%;"><p>1</p></td><td valign="top" style="width: 22.3236%;"><p>Turbosmart Sticker</p></td><td valign="top" style="width: 67.6915%;"><p>Turbosmart sticker</p></td></tr></tbody></table><p>&#xA0;</p><p>&#xA0;Pictured Inline Fuel Filter<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025100305-203aca0e-7e9f-4ef9-89e6-9c65f44374fe-fc29fcb6-97ae-4825-beac-e930c92e671c.png" style="width: 708px;" class="fr-fic fr-dib"></p><p>&#xA0;Pictured Billet Fuel Filter<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025100305-0ab16290-ffcb-456e-98bd-89fc8ca3f806-ec81818d-18d1-4fe2-a416-f0e4a62bb8a2.png" style="width: 552px;" class="fr-fic fr-dib"></p><p><br></p><h2 id><strong>&#xA0;</strong></h2><h2 id="_Toc85459239">FITTING YOUR FUEL FILTER</h2><p style="text-align: left;">Locate fuel pressure feed line, determine mounting location, <span style="font-size: 16px;">Take time to determine where you wish to mount the filter on the vehicle. It&apos;s recommended that fuel flows from the pump on the outside of the filter and passes into the inside before passing to the engine.</span></p><p style="text-align: left;"><span style="font-size: 16px;">&#xA0;<img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025100305-a140d325-1a5e-40d0-ad15-c9d93471113c-39bbc9d4-d130-4c5f-a6ca-bce6ec27da6e.png" style="width: 1165px;" class="fr-fic fr-dib"></span></p><p style="text-align: left;"><br></p><p style="text-align: left;"><span style="font-size: 16px;"><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025100305-902f769d-d83f-4902-b53d-d8c416b4b898-87315bb0-55ad-434c-be35-a99f63d3539e.png" style="width: 893px;" class="fr-fic fr-dib"></span><br></p><p><strong>CAUTION!</strong></p><p><strong>Do not place the Fuel Filter near a significant heat source as this may lead to severe engine fires.</strong></p><p><strong>CAUTION!</strong></p><p><strong>Ensure to relieve fuel pressure before removing OEM Fuel Pressure Regulator</strong></p><p><strong>CAUTION!&#xA0;</strong></p><p><strong>If fuel leaks are present &#x2013; switch off engine immediately and rectify leaks.</strong></p><p><br></p><h2 id="isPasted">Servicing your Fuel Filter</h2><p>The filter comes with a microglass filter to remove particles flowing to the engine, we&apos;d recommend that the fuel filter be inspected regularly in particularly abnormal environments. However replacing every 10,000km or every 6,000 miles is recommended. When refitting filter cup a fuel safe silicone grease should be used on the O-ring to ensure smooth operation and exceptional sealing. Inspection of o-ring is recommended for splits or tears. &#xA0;Torquing to 20N/mm is recommended for the end caps and fuel filter cap.</p><p><br></p><p><strong>Inline Fuel Filter</strong></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025100305-ef1621cf-ac91-411a-8d6f-197948d56bed-a451144a-bbba-49ed-be76-cb4139265161.png" style="width: 1212px;" class="fr-fic fr-dib"></p><p><strong>Billet Fuel Filter</strong></p><p><img src="https://attachments.gorgias.help/ZPB9rx1MeRMxWVa3/hc/MNVgn6mGBR71j8BO/2025100305-64ed9a75-2344-4233-92b5-e9e23789eb5a-2758d5b3-0223-43a0-9ad0-ca98ab2a437a.png" style="width: 953px;" class="fr-fic fr-dib"></p><p>&#xA0;</p><h2 id="trouble-shooting">TROUBLE SHOOTING</h2><p><strong>&#xA0;</strong></p><ul><li style="font-size: 16px;">FPR Leaking &#x2013; Check fittings are tight and O-Rings are present or not damaged.</li><li style="font-size: 16px;">Fuel Pressure is low &#x2013; Fuel Filter Blockage</li><li style="font-size: 16px;">FPR not holding base pressure &#x2013; Check for blockages, leaks in the system and that fuel pumps are active.</li><li style="font-size: 16px;">Failing the above, submit a technical request to <a href="mailto:tech@turbosmart.com.au">tech@turbosmart.com.au</a> with information of your engine, fuel type and photos of installation</li></ul><p><br></p>

Inline Fuel Filter

Turbosmart

Filter

Product Instructions

Fuel Pressure Regulators

BigBubba BPV/ Bubba Sonic VTA Instructions

Big Bubba

TS-0223-1082 / TS-0223-1282  EM Series Diverter Valve VR19

TS-0223-1296 - EM Series Diverter Valve VR13

TS-0225-1202 - F150 EM Series Diverter Valve

TS-0223-1292 - EM Series Diverter Valve VR9

TS-0223-1X83 - EM Series Diverter Valve VR20

TS-0223-1X88 - BOV Kompact EM Dual Port VR5 - Instructions

TS-0223-1082 - BOV Kompact EM Series - Instructions

TS-0223-1055- BOV Kompact EM Series - Instructions

BOV Kompact EM Series - Solenoid Instructions

TS-0223-1255 - BPV Kompact EM Series - Instructions

TS-0223-1266 - EM Series Diverter Valve VR2

TS-0223-1278 - EM Series Diverter Valve VR22

TS-0223-1X64 - EM Series Diverter Valve VR30

TS-0223-1X48 - EM Series Diverter Valve VR58 Gen 3 B58

TS-0223-1041 & TS-0223-1241 - EM Series Diverter Valve VR32 Dodge Ram

TS-0223-1041 & TS-0223-1241 EM Series Diverter Valve VR32 Dodge Ram HIGH OUTPUT

TS-0225-1001 BOV Kompact EM F150

TS-0225-1202 EM SERIES DIVERTER VALVE F150

TS-0223-1087 & TS-0223-1287 EM SERIES DIVERTER VALVE VR7

Kompact EM Valves

GenV RacePort Blow Off Valve Instructions

GenV RacePort EM Blow Off Valve Instructions

GenV RacePort Plumb back Blow Off Valve Data Sheet

GenV RacePort Blow Off Valve Data Sheet

GenV RacePort EM Blow Off Valve Data Sheet

Raceport

GenV ProPort Blow Off Valve Instructions

Proport

Vee Port Pro Instructions

Mazda / Subaru Dual Port Instructions

Subaru Plumb Back Instructions

BOV 5

RacePort

ProPort

PowerPort

Kompact

Kompact EM

Bov5 Accessories

BigBubba

Blow-off Valve Spares

TS-0304-100X - Electronic BOV Controller

BOV Controller

TS-0203-1018 - BOV Kompact Hyundai Genesis

TS-0203-1036 - BOV Kompact Hyundai i30N, Kona N & Veloster N

TS-0203-1217- BOV Kompact Civic Type R

TS-0203-122X - Kompact Universal Plumback BOV

Blow-Off Valves

FUEL PRESSURE REGULATORS INSTRUCTIONS

Standard Range

FPR Pro Series

Pro Series

UltraGate38 Spares & Accessories

UltraGate38

CompGate40 Spares & Accessories

CompGate40

HyperGate45 Spares & Accessories

HyperGate45 Lite

HyperGate45

ProGate50 Spares & Accessories

ProGate50

Spares

PowerGate60

Electronic

Pneumatic

Compressed Gas

Modular Straight Gate

Straight Gate

Gas Valve Actuator

Gas Valve Actuators

Compressed Gas / CO2 External Wastegate Instructions

Compressed Gas Wastegate

External Wastegates

TS-0620-4012 - TS-0620-4014 - GenV IWG (Twin Port) Wastegate Actuator Suit BorgWarner EFR 14psi - Instructions

TS-0625-3143 -GenV IWG (Twin Port) Wastegate Actuator Suit Garrett G25 14 Psi - Instructions

Internal Wastegate Actuators

eBG50/76 Electronic Boost Gate

Compressed Gas (CO2) Boost Gate - TS-026X-12X2

BoostGate

Raceport EM

Charge Air Control

Turbocharger Instructions

TS-199-30XX - Turbo Adapters

Accessories

Turbocharger

TS-0305-1001 - BlackBox Electronic Wastegate Controller - Instructions

eBoost 3

Vehicle Specific Diagrams

Manual

Fuel Cut Defenders

Boost Control

Ranger Raptor Intercooler

TS-CCA-VSFD001S/B - Performance Intercooler Upgrade Suit Ford F150 EcoBoost

TS-CCA-VSFD002S/B - Performance Intercooler Upgrade Suit Ford Ranger Raptor

Ford

Intercooler

TS-0804-1004 Turbocharger Direct Mount Oil Filter 44um - Banjo AN-4

OPR V2

ProOPR

TS-0804-1004 - Turbocharger Direct Mount Oil Filter

TS-0891-0XXX - Oil Caps

Oil Cap

Oil Management

TS-0701-2011 - Electrical EGT Gauge - Instructions

TS-0101-2023 - Vacuum - 30 PSI Boost Gauge

TS-0704-1X01- CO2 Manifold

TS-0705-1001 - Exhaust Manifold Pressure Dampener

Reference and Sensor Blocks

Gauges

GenV Wastegate  Standard / Motorsport / High Pressure Instructions

eSG Electronic StraightGate Instructions

eWG GenV Electronic Wastegate Instructions

MSG50 Modular StraightGate50 Instructions

PSG Pneumatic StraightGate Instructions

Spring Pressure Chart GENV HP WG38/40/45

Spring Charts

How to create an account?

My order was marked delivered but it’s not here.

What do I do if I receive the wrong item in my order?

How long does delivery take?

Website Support

Turbosmart Logo Guidelines

Turbosmart Logos For Web Use

Turbosmart Logos For Print Use

Brand Guidelines

Brand Assets